Apoxie Paste

Apoxie^® Paste is an innovative product that permanentally fills, bonds and repairs most materials. This all-purpose paste is thicker and tends to stay put. It has been proven effective on ceramics,metals, wood, stone, foam, and dissimilar products, though it is not limited to these. Apoxie^® Paste is easy and safe to use, unlike solvent-based liquids. It can be spread thick or thin with a knife or craft stick. To make paste thinner, microwave it in package in 15 second increments. (Be careful with hot, sticky product!) It is water proof with 0% shrinkage, and can be sanded and painted.

Features & Benefits

• Offers economy as well as performance,             strength and waterproof permanence.                Freeze-thaw stable.
• Acid & UV resistant, Safe to use with potable      water. Electrically non- conductive.                      Environmentally Safe!
• Flat to semigloss finish to make repairs and       painting easier.
• Self-hardening, 2 part product (A & B) must        be mixed thoroughly. Batter like consitancy.
• Open working time about 1-3 hours. Cures         hard overnight (24 hour full  cure).
• 0% shrinkage.
• Slightly Translucent, Khaki Color
• Gripping Flexibility, strongly adheres to                almost any clean surface . . . including                ceramic, fiberglass, foam, glass, metal,              plastics, resin, stone, wood, and more.
• Can be seamlessly feathered before set-up,       or sanded, tapped, lathed or  otherwise             tooled after.
• User friendly paste. Non-flammable,                      non-hazardous, no fumes. Complies with            ASTM D.4236.
• Clean up with Apoxie^® Safety Solvent or               water.

*Wear appropriate disposable gloves [e.g., vinyl or nitrile] when blending parts A&B... [S 37]
*To make paste thinner, gently heat ‘Part A’ package in hot water or microwave package in 10 second increments (no more then 40 seconds) to a brush-able state.
*Caution, product will be Hot & Sticky! Allow product to cool before handling or mixing with Part B. Heating this product will accelerate working time.

1. Measure equal parts of A & B. Both have a batter-like consistency. Use of a craft stick & a disposable mixing surface or vessel is highly recommended.
2. Mix vigorously, about 2 minutes, until product feels warm and a uniform color is achieved. *Note that incomplete mixing will give poor results. Paste can be tinted with a small amount of paint or pigment after mixing (A+B) to match or create a desired color. A little colorant goes a long way.
3. Paste is now ready to use and has a working time of 1-3 hours. It can be spread thick or thin with a tool/craft stick, or poured for casting.
4. Clean up with soap & water or Aves Safety Solvent, which is also very helpful for smoothing.

*24 hour cure time is required for product to be waterproof and for hard finishing purposes such as sanding, tapping, drilling & painting.
*Wear goggles & dust mask when sanding/grinding cured Paste... [S 39/36]
*Keep containers sealed when not in use.
*Keep out of reach of children...[S 2]
*Extend shelf life by refrigerating or freezing.

Apoxie^® Paste is available in this color:

Khaki