Power Print

Powerprint transfers images printed from a laser printer or photocopy to canvas, paper, fabric, ceramic, metal and Powertex treated surfaces. The surface should be in a light color and completely dry. Don't forget to reverse your image when printing.

Great for collage.

Powerprint works great for layering in a collage or placing a portion of an image over a background where the applied image becomes a part of the background.  If you are looking for a perfect transfer of a photo quality image, this may not produce satisfactory results for your application.  The process of removing the backing paper may create some minor damage to the ink portion that has been applied to the background, especially if your background is not smooth and full adherence is not achieved.

How to use Powerprint

1. Brush a coat of Powerprint on surface to receive print. Brush a coat on the front side of the print.  These should be fairly wet and cover well.
2. Place the print face down on the receiving surface that has been coated.
3. Smooth the print with a roller or carefully with a squegee. 
4. Let it dry or use a hair dryer to dry.
5. After it is dry use a wet sponge to wet the back side of the print.
6. Use your fingers to rub the print, rolling up the paper.  Remove as much paper as you can without damaging the color layer.
7. Let it dry and you will see additoonal paper showing up.
8. Repeat the wet sponge and finger process to remove the remaining paper.